1. F. Liu(刘福林), Y. Chen, L. Li, C. Wang, Q Wang, Y. Liu. Influence of welded pores on fatigue behavior of TC17 titanium alloy welded joints subjected to gigacycle regime at room and high temperatures, Journal of Materials Science & Technology, 2023, In Press. (中科院一区,IF=10.9) 2. F. Liu(刘福林), H. Peng, Y. Liu, C. Wang, Q. Wang, Y. Chen, Crack initiation mechanism of titanium alloy in very high cycle fatigue regime at 400℃ considering stress ratio effect, International Journal of Fatigue,163 (2022). (中科院一区,IF=6.0) 3. F. Liu(刘福林), Y. Chen, C. He, Y. Liu, C. Wang, Q. Wang, L. Li, Creep-fatigue voids and sub-grain boundaries assisted crack initiation for titanium alloy in VHCF regime with high mean stress at 400°C, Materials Science and Engineering: A, 844 (2022). (中科院一区,IF=6.4) 4. F. Liu(刘福林), Y. Chen, C. He, L. Li, C. Wang, H. Li, H. Zhang, Q. Wang, Y. Liu, Tensile and very high cycle fatigue behaviors of a compressor blade titanium alloy at room and high temperatures, Materials Science and Engineering: A, 811 (2021). (中科院一区,IF=6.4) 5. F. Liu(刘福林), Y. Chen, C. He, C. Wang, L. Li, Y. Liu, Q. Wang, Very long life fatigue failure mechanism of electron beam welded joint for titanium alloy at elevated temperature, International Journal of Fatigue, 152 (2021). (中科院一区,IF=6.0) 6. F. Liu(刘福林), C. He, Y. Chen, H. Zhang, Q. Wang, Y. Liu, Effects of defects on tensile and fatigue behaviors of selective laser melted titanium alloy in very high cycle regime, International Journal of Fatigue, 140 (2020). (中科院一区,IF=6.0) 7. Y. Liu1, F. Liu1(刘福林,共一), R. He, Q. Wang, C. Wang, C. He, Y. Chen, Mechanical behaviors of electron beam welded titanium alloy up to very high cycle fatigue under different process conditions, Materials Science and Engineering: A, 802 (2021). (中科院一区,IF=6.4) 8. F. Liu(刘福林), Y. Chen, L. Li, C. Wang, Q. Wang, Y. Liu, Interior defect-induced crack initiation mechanism and initial growth behavior for Ti6Al4V alloy fabricated using laser powder bed fusion, Journal of Materials Research and Technology, 043 (2022). (中科院一区,IF=6.4) 9. F. Liu(刘福林), Y. Chen, J. Mai, C. Wang, Q. Wang, Y. Liu. Optimizing microstructure and mechanical properties of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy electron beam welded joint through post-weld heat treatment, Journal of Materials Research & Technology, 26 (2023). (中科院一区,IF=6.4) 10. F. Liu(刘福林), H. Zhang, H. Liu, Y. Chen, K. Kashif, Q. Wang, Y. Liu, Influence of Welded Pores on Very Long-Life Fatigue Failure of the Electron Beam Welding Joint of TC17 Titanium Alloy, Materials, 12 (2019). (中科院三区,IF=3.4) |